VENETA

The VENETA sound sytem combines the KBAS loudspeakers with KHUB audio interface in a single package.

This pairing creates a system where geometry, signal chain, DSP and source integrate into a single expression, no guesswork, no compromise. The listener experiences the full emotional bandwidth of music, without clutter. It turns music into a presence to be shared.

Scandinavian-inspired minimalism, tuned for presence, impact, depth, detail and emotional weight.

While the loudspeaker's placement in your space will naturally influence its acoustics. It is strongly recommended to place them in a room larger than 130m³ (NOTE: cubic meters), following the recommended below stated placement guidelines, failing to do so, DSP adjustment is required:

• Distance between speaker units: 2m to 6m (greater separation requires more angling toward the listening position).
• Distance between each speaker unit and the wall behind them: 30cm to 60cm.
• Distance between each speaker unit and the side wall: Minimum of 1m.
• Distance between the speaker units and the listening position: Minimum of 3m.
• Distance between listening position and the wall behind it: Minimum of 2m.

Specifications:

1. Signal input Audio interface
   • Line In @10kOhm
     • Stereo (RCA connector)
   • Phono In @47kOhm (MM)
     • Stereo (RCA connector)
   • USB @ 96kHz/24bit
     • USB-C connector
   • Bluetooth @ 48kHz/16bit
     
     
2. Signal output Audio interface
   • Balance Out
     • Stereo (Dual 3pin XLR connector)
       
       
3. Room correction:
   • Build in programable DSP
     
     
4. Signal input Loudspeakers
   • Balance In
     • Mono (Single 3pin XLR connector)
       
       
5. Power Inputs
   • Audio interface
     
     • 100-250 VAC / 50-60 Hz / 15W
   • Loudspeaker (per unit)
     • 100-250 VAC / 50-60 Hz / 180W
       
       
6. Power Outputs Loudspeaker
   • Woofer: 50W
   • Mid: 25W
   • Tweeter: 15W
     
     
7. Features
   • Audio interface
     
     • Old school power toggle switch (no standby power)
     • Front panel power LED indicator
     • Front panel source select switch
   • Loudspeaker
     
     • Analog active crossover
     • Class-D output power stage
       
     • Old school power toggle switch (no standby power)
       
     • Front panel power LED indicator
       
       
8. Construction material
   • Audio interface
     
     • ALUMINIUM
   • Loudspeaker
     
     • MDF
     • BIRCH PLYWOOD
     • PETG
     • ALUMINIUM
   • Loudspeaker stand 
     • MDF
     • MAHOGANY VENEER
       
       
9. Dimensions (W – H – D)
   • Loudspeaker enclosure 
     • 436mm
     • 666mm
     • 571mm
       
   • Loudspeaker stand
     • 380mm
     • 200mm
     • 609mm
   • Audio interface 
     • 242mm
     • 75mm
     • 155mm
       
       
10. Mass per unit
    • Loudspeaker enclosure (per unit)
      
      • 30kg
    • Loudspeaker stand (per unit)
      • 3kg
    • Audio interface
      • 1kg
        
        
11. What comes in the package
    
    • 1x Audio interface
      
    • 2x Loudspeakers
      
    • 2x Loudspeaker stand
    • 3x 2m Power cord
    • 2x 3m XLR 3-pin cables