PUMPKIN

The PUMPKIN sound sytem combines the KAS loudspeakers with KHUB audio interface in a single package.

While the loudspeaker's placement in your space will naturally influence its acoustics. It is strongly recommended to place them in a room larger than 80m³ (NOTE: cubic meters), following the recommended below stated placement guidelines, failing to do so, an additional DSP is required:

• Distance between speaker units: 2m to 4m (greater separation requires more angling toward the listening position).
• Distance between each speaker unit and the wall behind them: 30cm to 60cm.
• Distance between each speaker unit and the side wall: Minimum of 1m.
• Distance between the speaker units and the listening position: Minimum of 2m.
• Distance between listening position and the wall behind it: Minimum of 2m.

Specifications:

1. Signal input Audio interface
   • Line In @10kOhm
     • Stereo (RCA connector)
   • Phono In @47kOhm (MM)
     • Stereo (RCA connector)
   • USB @ 96kHz/24bit
     • USB-C connector
   • Bluetooth @ 48kHz/16bit
     
     
2. Signal output Audio interface
   • Balance Out
     • Stereo (Dual 3pin XLR connector)
       
       
3. Room correction:
   • Build in programable DSP
     
     
4. Signal input Loudspeaker (signle unit):
   • Balance In
     • Mono (Single 3pin XLR connector)
       
       
5. Power Inputs
   • Audio interface:
     • 100-250 VAC / 50-60 Hz / 15W
   • Loudspeaker (signle unit):
     • 100-250 VAC / 50-60 Hz / 75W
       
       
6. Power Outputs Loudspeaker (signle unit):
   • Woofer: 25W
   • Tweeter: 15W
     
     
7. Features
   • Audio interface:
     • Old school power toggle switch (no standby power)
     • Front panel power LED indicator
     • Front panel source select switch
   • Loudspeaker:
     • Analog active crossover
     • Class-D output power stage
       
     • Old school power toggle switch (no standby power)
       
     • Front panel power LED indicator
       
       
8. Construction material
   • Audio interface:
     • ALUMINIUM
   • Loudspeaker:
     • MDF
     • BIRCH PLYWOOD
     • PETG
       
     • NYLON PA11
       
       
9. Dimensions (W – H – D)
   • Loudspeaker: 
     • 380mm
     • 195mm
     • 285mm
   • Audio interface:
     • 242mm
     • 75mm
     • 155mm
       
10. Mass 
    • Loudspeaker (signle unit): 7.5kg
      
    • Audio interface: 1kg
      
      
11. What comes in the package 
    • 1x Audio interface
      
    • 2x Loudspeakers
      
    • 3x 2m Power cord
    • 2x 3m XLR 3-pin cables